Softener Features

• 12" to 36" diameter tanks
  
• exchange capacities 60 to 600,000 grains
  
• flow rates 16 to 160 GPM
  
• solid state time clock or electronic demand controls

Filter Features

• 12" to 36" diameter tanks
  
• organics removal
  
• chlorine, taste,odor, and color removal
  
• iron and hydrogen sulfide removal
  
• sediment removal down to 10 microns particle size
  
• solid state time clock or electronic demand controls

EcoWater Fiberglass Softeners and Filters

The EcoWater Fiberglass Tank
In tank diameters through 24", EcoWater manufactures its own fiberglass tanks. We can control both quality and manufacturing cost, and thus produce better tanks at very competitive prices. These tanks carry a generous 10-year warranty. Tank sizes 30" diameter and larger are made to our strict specifications, and carry a 5-year warranty.

Softeners
Series ES
Series ES softeners offer a wide range of capabilities: exchange capacities from 60 to 600,000 grains; valve sizes of 1", 1.5", 2" and 3"; and tank diameters of 12" to 36". Softeners use the experience-proven Fleck valve controlled by a standard solid state time clock control, or an optional fully programmable electronic control. Softeners are available in single, duplex, or multiple tank modes.

Filters
Series EC
Activated carbon filters efficiently remove chlorine and other organics that cause taste, odor, and color problems in water. Two media are offered:

1. A standard high-capacity granular carbon for removal of chlorine, taste, odor, and color. It has a rugged grain structure, high density, and a large surface area.
   
2. An optional media that consists of selected grades of bituminous coal for removal of chlorine and other organics. It is combined with suitable binders and activated at high temperatures for superior binders and activated at high temperatures for superior hardness and long life. Large surface area and large pore volume efficient adsorption of high and low molecular weight organics.

Series EG
Uses a manganese-coated greensand, for routine removal of iron from water. It is especially suited to water that has high iron content and low silica, where a high volume of water is to be treated. An anthracite cap can combine with greensand for more difficult iron removal problems, and improved capacity.
Continuous Regeneration. An optional proportioning chemical feed pump continuously feeds chlorine, potassium permanganate, or both, to oxidize iron, manganese, and hydrogen sulfide for more efficient removal.

Series EM
Three layers of media specially selected for particle size and specific gravity provide highly efficient removal of particulate matter from water. Top layer traps coarse debris, the middle layer traps medium size particles, and the bottom layer traps particles as small as 10 microns.
Advantages are highly efficient filtering and longer service runs between filter backwashes, since there is far less clogging than with conventional single-media filters.